Skip to content
Calculator Collection

Compare calculators

Both calculators run independently — change the inputs on either side to compare results.

3d Printing

3D Print Support Material Calculator

Estimates the volume of support material needed for overhanging features in a 3D print, factoring in support type, density, and overhang angle. Helps you plan filament use and print time for complex models.

Fill in the required fields to see your result.
3d Printing

3D Print Layer Resolution Calculator

Finds the ideal layer height for your 3D print given your nozzle size and stepper resolution. Use it before slicing to balance print quality against build time.

Optimal Layer Height

0.3 mm

0.3
0.1
0.2
0.32
Ultra-fine layersFine detailStandard layersDraft / max throughput

0.2-0.32 mm is the standard range, about 50-80% of nozzle width. The example's 0.3 mm sits here — a balanced speed/quality choice that stays under the 80% extrusion ceiling.

Layer height is expressed as a fraction of nozzle diameter; the industry rule keeps layers between 25% and 80% of nozzle width, so a 0.4mm nozzle at 0.75 quality gives 0.3mm (example).

Key differences

3D Print Support Material Calculator3D Print Layer Resolution Calculator
Category3d Printing3d Printing
Inputs required43
ResultSupport Material Volume (cm³)Optimal Layer Height (mm)
What it doesEstimates the volume of support material needed for overhanging features in a 3D print, factoring in support type, density, and overhang angle. Helps you plan filament use and print time for complex models.Finds the ideal layer height for your 3D print given your nozzle size and stepper resolution. Use it before slicing to balance print quality against build time.